產品特點

  1．降低脫模阻力，有效降低脫模時沙芯的變形。

  2．噴涂一次可重復使用，在芯盒內腔上積垢量少，易清理。

  3．安全性、環保性較強，對環境，人體使用安全。

  4．潤滑作用顯著，延長模型使用壽命，使得鑄造成品率更高

  5．高閃點產品，使用方便，無火災危險

使用方法

1．先清理芯盒模具。

2．把攪拌均勻的脫模劑用噴槍或毛刷噴(刷)在芯盒內腔、定芯棒等表面上。

3．噴霧應細而均勻，在保證脫模效果的前提下應盡量少噴(刷)，否則模型會有積垢，影響砂芯(型)尺寸精度。

CharacterlstlCS：

1．Reduce demoulding resistance，effectively reduce the deformation of sａnd core when demoulding

2．Spraying once can be reusedl in the core box cavity on a small amount offoulingf easy to clean

3．Safety,environmental protection，environmental，human use safety．

4．The lubrication effect is significant,prolong the service life of the model，ａnd make the casting yield higher

5．High flash point products，easy to use，no fire hazard．

Usage：

1．First clear the Core box mold

2．The mixing of the release agent with a spray gun or brush coated in the core box cavity，fixed mandrel and other surfaces．

3．Spray should be fine and uniform，in order to ensure the release effect of the premise should be as little as possible spray(brush)．otherwise the model will have fouling，the impact of sａnd core

  dimension accuracy．