詳細信息
LED球泡燈罩注吹：FD-120C-IB
LED球泡燈罩注吹圖片：
LED球泡燈罩注吹參數
FD-120C-IB參數表/SPECIFICATION
項目 ITEMS | 單位Unit | FD-120C-IB | |||
射出系統 Injection Unit | 螺桿直徑 | Screw diameter | mm | Φ32 | |
螺桿長徑比 | Screw L/D ratio | L/D | 22.5 | ||
理論射出容積 | Theoretical injection volume | cm3 | 129 | ||
射出重量（PS） | Maximum injection weight（PS） | g | 118 | ||
oz | 4.2 | ||||
射出壓力 | Maximum injection pressure | kgf/cm2 | 2461 | ||
射出率 | Injection rate | cm3/sec | 84 | ||
可塑化能量（PS） | Plasticizing capacity（PS） | kg/hr | 41 | ||
鎖模系統 Clamping Unit | 鎖模力 | Clamping force | ton | 120 | |
開模行程 | Opening stroke | mm | 560 | ||
模厚 | Minimum mold thickness | mm | 550 | ||
開模距離 | Open daylight | mm | 1110 | ||
模柱間距 | Space between tie-bars | mm | 425X425 | ||
模板有效尺寸 | Plate dimension | mm | 620X620 | ||
頂出行程 | Ejector stroke | mm | 150 | ||
頂出力 | Ejector force | ton | 3.9 | ||
吹塑系統 Blow Unit | 轉塔轉換工位 | Rotary table station | station | 2 | |
轉塔移動行程 | Rotary table moving stroke | mm | 300 | ||
吹塑模合模力 | Blow mold clamping force | ton | 2.7 | ||
吹塑模開關行程 | Blow mold opening stroke | mm | 30-100 | ||
壓縮空氣壓力 | Maximum blow pressure | kg/cm2 | 25 | ||
其它 Ｏthers | 油泵電機 | Motor power(pump) | kW | 16+5.5+1.5 | |
系統壓力 | Hydaulic system pressure | kgf/cm2 | 140 | ||
電熱容量 | Barrel heating power | kW | 9.3 | ||
油箱容積 | Oil tank capacity | l | 480 | ||
機器尺寸 | Machine dimensions（approx.） | m | 5.3X1.0X1.6 | ||
機器重量 | Machine weight（approx.） | ton | 5.5 | ||
